プレスリリース
SMIC Reports 2011 Second Quarter Results
Shanghai, China – August 10, 2011. Semiconductor Manufacturing International Corporation (NYSE: SMI; SEHK: 981) ("SMIC" or the "Company"), one of the leading semiconductor foundries in the world, today announced its consolidated results of operations for the three months ended June 30, 2011.
Second Quarter 2011 Highlights:
- Revenue down by 4.9% to $352.4 million in 2Q11 from $370.6 million in 1Q11 and down by 5.9% compared to 2Q10.
- Gross margin was 14.3% in 2Q11 compared to 18.6% in 1Q11 primarily due to decreased wafer starts from weakened demand in the third quarter.
- Net cash flow from operations increased to $79.4 million in 2Q11 from $73.4 million in 1Q11.
- Loss attributable to holders of ordinary shares was $3.8 million in 2Q11, compared to income of $10.2 million in 1Q11.
- Diluted EPS was $(0.0066) per ADS.
- Revenue down by 4.9% to $352.4 million in 2Q11 from $370.6 million in 1Q11 and down by 5.9% compared to 2Q10.
- Gross margin was 14.3% in 2Q11 compared to 18.6% in 1Q11 primarily due to decreased wafer starts from weakened demand in the third quarter.
- Net cash flow from operations increased to $79.4 million in 2Q11 from $73.4 million in 1Q11.
- Loss attributable to holders of ordinary shares was $3.8 million in 2Q11, compared to income of $10.2 million in 1Q11.
- Diluted EPS was $(0.0066) per ADS.
Third Quarter 2011 Guidance:
The following statements are forward looking statements which are based on current expectations and which involve risks and uncertainties, some of which are set forth under "Safe Harbor Statements" below.
- Revenue is expected to decline between -14% to -17%.
- Gross margin is expected to range from 0% to 3%.
- Operating expenses excluding foreign exchange differences are expected to range from $86 million to $89 million.
Gary Tseng, Chief Financial Officer commented, "Highlighting our second quarter performance, revenue decreased 4.9% quarter-over-quarter to $352 million. This decline was in part due to our customer transition to 65nm and 45nm and largely due to unexpected changes in some of our customers' programs—including some customers skipping 65nm to work on 45nm and one customer abandoning their lower-end baseband business. Despite these changes, we continue to have new tape outs for 65nm and customers committed to working with us on their 45/40nm products, which will likely contribute meaningful revenue next year.
"Looking into the third quarter, the overall demand from both international and domestic customers is weaker than expected due to relatively soft end-market consumption and high inventory, in addition to sudden customer product changes. The combination of these factors will pose adverse impacts to our revenue for the third quarter of 2011. Our visibility into fourth quarter demand is currently limited, and the overall global economic outlook also contributes to uncertainty. We currently do not see any particular strengths from customer demand for back-to-school and holiday seasons, so we currently remain cautious on our overall second half 2011 outlook."
Conference Call / Webcast Announcement
Date: Thursday, August 11, 2011
Time: 8:30 a.m. Shanghai time
Dial-in numbers and pass code:
Dial in 1-800-510-0219 (Pass code: SMIC)
International 1-617-614-3451 (Pass code: SMIC)
HK 852-3002-1672 (Pass code: SMIC)
A live webcast of the 2011 second quarter announcement will be available at http://www.3dsentson.com under the “Investor Relations” section, or at
URL: http://phx.corporate-ir.net/playerlink.zhtml?c=176474&s=wm&e=4153540
An archived version of the webcast, along with an electronic copy of this news release will be available on the SMIC website for a period of 12 months following the webcast.
About SMIC
Semiconductor Manufacturing International Corporation (“SMIC”; NYSE: SMI; SEHK: 981) is one of the leading semiconductor foundries in the world and the largest and most advanced foundry in Mainland China, providing integrated circuit (IC) foundry and technology services at 0.35-micron to 45/40-nanometer. Headquartered in Shanghai, China, SMIC has a 300mm wafer fabrication facility (fab) and three 200mm wafer fabs in its Shanghai mega-fab, two 300mm wafer fabs in its Beijing mega-fab, a 200mm wafer fab in Tianjin, and a 200mm fab under construction in Shenzhen. SMIC also has customer service and marketing offices in the U.S., Europe, and Japan, and a representative office in Hong Kong. In addition, SMIC manages and operates a 300mm wafer fab in Wuhan owned by Wuhan Xinxin Semiconductor Manufacturing Corporation.
For more information, please visit www.3dsentson.com
Safe Harbor Statements
(Under the Private Securities Litigation Reform Act of 1995)
This press release contains, in addition to historical information, “forward-looking statements” within the meaning of the “safe harbor” provisions of the U.S. Private Securities Litigation Reform Act of 1995. These forward-looking statements, including statements under “Third Quarter 2011 Guidance” are based on SMIC’s current assumptions, expectations and projections about future events. SMIC uses words like “believe,” “anticipate,” “intend,” “estimate,” “expect,” “project” and similar expressions to identify forward-looking statements, although not all forward-looking statements contain these words. These forward-looking statements are necessarily estimates reflecting the best judgment of SMIC’s senior management and involve significant risks, both known and unknown, uncertainties and other factors that may cause SMIC’s actual performance, financial condition or results of operations to be materially different from those suggested by the forward-looking statements including, among others, risks associated with cyclicality and market conditions in the semiconductor industry, the downturn in the global economy and the impact on China’s economy, intense competition, timely wafer acceptance by SMIC’s customers, timely introduction of new technologies, SMIC’s ability to capture growth opportunities in China, supply and demand for semiconductor foundry services, industry overcapacity, shortages in equipment, components and raw materials, orders or judgments from pending litigation, availability of manufacturing capacity and financial stability in end markets.
Investors should consider the information contained in SMIC’s filings with the U.S. Securities and Exchange Commission (SEC), including its annual report on 20-F filed with the SEC on June 28, 2011, especially in the “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” sections, and such other documents that SMIC may file with the SEC or The Hong Kong Stock Exchange Limited (“SEHK”) from time to time, including on Form 6-K. Other unknown or unpredictable factors also could have material adverse effects on SMIC’s future results, performance or achievements. In light of these risks, uncertainties, assumptions and factors, the forward-looking events discussed in this press release may not occur. You are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date stated, or if no date is stated, as of the date of this press release. Except as required by law, SMIC undertakes no obligation and does not intend to update any forward-looking statement, whether as a result of new information, future events or otherwise.
For complete earnings release and webcast please go to:
http://www.3dsentson.com.hk/html/ir_calendar.php
Contact:
Investor Relations
+86-21-3861-0000 ext. 12804
ir@3dsentson.com
Date: Thursday, August 11, 2011
Time: 8:30 a.m. Shanghai time
Dial-in numbers and pass code:
Dial in 1-800-510-0219 (Pass code: SMIC)
International 1-617-614-3451 (Pass code: SMIC)
HK 852-3002-1672 (Pass code: SMIC)
A live webcast of the 2011 second quarter announcement will be available at http://www.3dsentson.com under the “Investor Relations” section, or at
URL: http://phx.corporate-ir.net/playerlink.zhtml?c=176474&s=wm&e=4153540
An archived version of the webcast, along with an electronic copy of this news release will be available on the SMIC website for a period of 12 months following the webcast.
About SMIC
Semiconductor Manufacturing International Corporation (“SMIC”; NYSE: SMI; SEHK: 981) is one of the leading semiconductor foundries in the world and the largest and most advanced foundry in Mainland China, providing integrated circuit (IC) foundry and technology services at 0.35-micron to 45/40-nanometer. Headquartered in Shanghai, China, SMIC has a 300mm wafer fabrication facility (fab) and three 200mm wafer fabs in its Shanghai mega-fab, two 300mm wafer fabs in its Beijing mega-fab, a 200mm wafer fab in Tianjin, and a 200mm fab under construction in Shenzhen. SMIC also has customer service and marketing offices in the U.S., Europe, and Japan, and a representative office in Hong Kong. In addition, SMIC manages and operates a 300mm wafer fab in Wuhan owned by Wuhan Xinxin Semiconductor Manufacturing Corporation.
For more information, please visit www.3dsentson.com
Safe Harbor Statements
(Under the Private Securities Litigation Reform Act of 1995)
This press release contains, in addition to historical information, “forward-looking statements” within the meaning of the “safe harbor” provisions of the U.S. Private Securities Litigation Reform Act of 1995. These forward-looking statements, including statements under “Third Quarter 2011 Guidance” are based on SMIC’s current assumptions, expectations and projections about future events. SMIC uses words like “believe,” “anticipate,” “intend,” “estimate,” “expect,” “project” and similar expressions to identify forward-looking statements, although not all forward-looking statements contain these words. These forward-looking statements are necessarily estimates reflecting the best judgment of SMIC’s senior management and involve significant risks, both known and unknown, uncertainties and other factors that may cause SMIC’s actual performance, financial condition or results of operations to be materially different from those suggested by the forward-looking statements including, among others, risks associated with cyclicality and market conditions in the semiconductor industry, the downturn in the global economy and the impact on China’s economy, intense competition, timely wafer acceptance by SMIC’s customers, timely introduction of new technologies, SMIC’s ability to capture growth opportunities in China, supply and demand for semiconductor foundry services, industry overcapacity, shortages in equipment, components and raw materials, orders or judgments from pending litigation, availability of manufacturing capacity and financial stability in end markets.
Investors should consider the information contained in SMIC’s filings with the U.S. Securities and Exchange Commission (SEC), including its annual report on 20-F filed with the SEC on June 28, 2011, especially in the “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” sections, and such other documents that SMIC may file with the SEC or The Hong Kong Stock Exchange Limited (“SEHK”) from time to time, including on Form 6-K. Other unknown or unpredictable factors also could have material adverse effects on SMIC’s future results, performance or achievements. In light of these risks, uncertainties, assumptions and factors, the forward-looking events discussed in this press release may not occur. You are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date stated, or if no date is stated, as of the date of this press release. Except as required by law, SMIC undertakes no obligation and does not intend to update any forward-looking statement, whether as a result of new information, future events or otherwise.
For complete earnings release and webcast please go to:
http://www.3dsentson.com.hk/html/ir_calendar.php
Contact:
Investor Relations
+86-21-3861-0000 ext. 12804
ir@3dsentson.com
